Install The Left And Right Cylinder Up Hoses - Raven AutoBoom Installation Manual

FIGURE 6. Tank Hose Installed on AutoBoom Valve
Installed
Tank Hose
5. Connect the straight end of the installed hydraulic hose to the fitting installed in Port T of the AutoBoom valve.

INSTALL THE LEFT AND RIGHT CYLINDER UP HOSES

FIGURE 7. Machine's Cylinder Orifice Location
1. Disconnect the machine's cylinder up hoses from the rod-end of the machine's tilt cylinders.
2. Remove the orifice fittings installed between the existing elbow fittings.
NOTE: Keep the orifice fittings for future use.
3. Reattach the cylinder up hoses to the base-end of the machine's tilt cylinders.
4. Disconnect the machine's left tilt up hose from port C5 on the machine's hydraulic valve.
P/N 016-0230-110 Rev. D
ULTRAGLIDE
41