Install Radar - Raven VSN Installation Manual

For nh sp 310f / miller 7310 front boom sprayers my19+

Hide thumbs Also See for VSN:

Table of Contents

CHAPTER 3

INSTALL RADAR

1. Remove the wheel motor covers on both front axles.

FIGURE 9. Removed Wheel Motor Covers

2. Install the spacers, brackets, and radar sensors to each side, orientating the sensors at a 45 degree angle

forward. The mounting holes will ensure the proper angle is achieved.

FIGURE 10. Lower Assembly and Small Frame Assembly

Lower Assembly

NOTE:

Prior to installing the sensor cover, record the serial number and whether the sensor is installed on the

right or left side of the machine.

The sensor covers should be installed after the cabling is routed.

VSN Installation Manual for NH SP 310F / Miller 7310 Front Boom Sprayers MY19+

Small Frame

Assembly

Table of Contents