Raven AutoBoom Installation Manual page 20

C 3
HAPTER
FIGURE 3. Port Plugs Removed from the AutoBoom Valve
3. Use an Allen wrench to remove the plugs from Ports 3A and 3B.
FIGURE 4. Orifice Fitting Removed from the AutoBoom Valve
4. Remove the orifice fittings from Ports 3A and 3B.
IMPORTANT: Tip the AutoBoom valve on its side and use the Allen wrench to remove the orifice from the cavity, taking
care not to let the fitting fall into the valve.
FIGURE 5. Port Plug Reinstalled on the AutoBoom Valve
16 Buhler Versatile SX280 AutoBoom® Installation Manual
Orifice Fitting
Removed - Keep
for Future Use