Install Fittings In The Smartrax Valve - Raven SmarTrax Installation Manual

C 3
HAPTER

INSTALL FITTINGS IN THE SMARTRAX VALVE

Before mounting the SmarTrax valve (P/N 334-0003-089) in the machine, install the proper fittings in the valve.
This prepares the valve for installation and simplifies the hose connection process later in the procedure.
FIGURE 1. Fittings Installed in the SmarTrax Valve
Fitting - -6 ORFS (M) to -6 SAE O-Ring (M) Straight Adapter
Fitting - -6 ORFS M/F 90° Swivel Elbow
Fitting - -8 ORFS (M) to -8 SAE O-Ring (M) 90° Elbow
Fitting - -8 ORFS (M) to -10 SAE O-Ring (M) Straight Adapter
Transducer - 0-3000 PSI Pressure
10
The appearance of the SmarTrax hydraulic valve
may vary slightly from the images contained in
this manual. However, the fittings, hose
connections, and cable connections remain the
same.
Fitting
Buhler Versatile 350-550, Tier IV (2012 & Newer) SmarTrax™ Installation Manual
NOTICE
Part Number
333-0012-084
333-0012-065
333-0012-229
333-0012-304
422-0000-086
Port
LSPV,
LS STEER
LSPV
P, T
A, B
PS