How To Edit The Display Icons; How To Add A New Display Icon - Furuno TZTL12F Operator's Manual

1.7

How to Edit the Display Icons

The default home screen arrangement provides seven displays (icons) in configura-
tions according to the equipment that you have in your network. If the arrangement
does not meet your requirements, you can change the display icons to suit your
needs. You can have a maximum of 10 display icons, in full screen, 2-way or 3-way
split screens. For example, you can show the radar and sounder (fish finder) displays
in a two-way split screen.
The displays available depend on the display division selected and your system con-
figuration. The table below outlines the display divisions and available displays.
Display division
Full screen
Two-way split
Three-way split
1.7.1

How to add a new display icon

1. Tap the [Home] icon to show the home screen.
2. Tap the + icon, shown right. (If the icon is not shown, this means
that all available display icons have been used. Erase an un-
necessary icon to make room. See paragraph 1.7.2.)
3. Follow the instructions below to create a display icon.
Display
division
choices
Your arrangement is then opened on the screen and the home screen is updated ac-
cording to your arrangement.
Available displays
Plotter, weather, radar, sounder, instrument, camera
Plotter, radar, sounder
Plotter, radar, sounder, instrument, camera
Custom display area Custom display area
Drag Drag
display display
division division
1. SYSTEM INTRODUCTION
Tap to save icon.
Drag Drag
display display
type type
Display
choices
1-11