Operation Of Pto Shaft - PRONAR T386 Operator's Manual

Pronar T386

2.1.9 OPERATION OF PTO SHAFT

• Before using the machine, the user should thoroughly acquaint himself with the
PTO shaft Operator's Manual and adhere to the recommendations contained in it.
• The trailer may only be connected to the tractor by appropriately selected PTO
shaft recommended by the Manufacturer.
• The PTO shaft has markings on the casing, indicating which end of the shaft shall
be connected to the tractor.
• Never use a damaged PTO shaft, it may cause an accident. A damaged shaft must
be repaired or replaced.
• Disconnect the shaft drive each time when it is not necessary to drive the pump of
the trailer's hydraulic system or when the tractor and trailer are positioned at an
unsuitable angle with regard to each other.
• The chains preventing the shaft cover from turning while the shaft is working, shall
be secured to a fixed element of trailer structure.
• Do NOT use the securing chains to support the shaft while the trailer is parked or
when transporting the trailer.
• The drive shaft must be equipped with a cover. Do NOT use the shaft with
damaged or missing guards.
• After connecting the shaft ensure that it is correctly and safely connected to the
tractor and to the trailer.
• Before starting the PTO drive, make sure that there are no bystanders (especially
children) in the danger zone. The machine operator is obliged to ensure proper
visibility of the working area.
• Before starting the PTO shaft, adjust its length according to the Operator's Manual
of the PTO shaft.
• Before starting PTO shaft, make certain that the PTO rotation direction is correct.
• When using the PTO shaft and the trailer, do not exceed the allowable rotation
speed. Do not overload the PTO shaft and the machine.
2.12
SECTION 2