Consumables; Hydraulic Oil - PRONAR T669 Operator's Manual

Agricultural trailer
Table of Contents

Advertisement

Pronar T669

5.7 CONSUMABLES

5.7.1 HYDRAULIC OIL

Always adhere to the principle that the oil in the trailer hydraulic system and in the tractor
hydraulic system are of the same type. In the event of application of different types of oil
make certain that both hydraulic substances may be mixed together. Application of different
oil types may cause damage to trailer or tractor. In a new machine, the hydraulic system is
filled with L HL32 Lotos hydraulic oil.
In the event of necessity of changing hydraulic oil for another oil, check the recommendations
of the oil Manufacturer very carefully. If it is recommended to flush the system with the
appropriate preparation, then comply with these recommendations. Attention should be
given, so that chemical substances used for this purpose do not damage the materials of the
hydraulic system. During normal trailer use change of hydraulic oil is not necessary, but if
required, this operation should be entrusted to a specialist service point.
TAB. 5.6
L-HL 32 Lotos hydraulic oil characteristics
ITEM
1
ISO 3448VG viscosity classification
2
Kinematic viscosity at 40°C
3
ISO 6743/99 quality classification
4
DIN 51502 quality classification
5
Flash-point
The oil applied because of its composition is not classified as a dangerous substance,
however long-term action on the skin or eyes may cause irritation. In the event of contact of
oil with skin wash the place of contact with water and soap. Do NOT apply organic solvents
(petrol, kerosene). Contaminated clothing should be changed to prevent access of oil to skin.
In the event of contact of oil with eye, rinse with large quantity of water and in the event of the
occurrence of irritation consult a doctor. Hydraulic oil in normal conditions is not harmful to
the respiratory tract. A hazard only occurs when oil is strongly atomised (oil vapour), or in the
case of fire during which toxic compounds may be released. Oil fires should be quenched
NAME
5.32
SECTION 5
UNIT
VALUE
-
32
2
mm
/s
28.8 – 35.2
-
HL
-
HL
C
230

Advertisement

Table of Contents
loading

Table of Contents