Resetting The Input Levels; Configuring Picture Settings - Christie GS 2K Series User Manual

• Blue Offset
3. Adjust the slider by arrow keys or press ENTER to input the value.
4. After inputting the value, press ENTER to apply.

Resetting the input levels

Reset all input levels parameters back to default.
1. Select Menu > Image Settings > Input Levels > Reset to Default.
2. Press ENTER.

Configuring picture settings

Depending on display content, choose the most suitable picture settings. Different picture settings
have different color temperature, brightness, and so on.
1. Select Menu > Image Settings > Picture Settings.
2. Select the appropriate picture setting:
• Video—Used for theater application. It sets the color temperature to 6000K with 70% of
maximum brightness.
• Bright—Used for large size or high brightness application. It sets the color temperature
to 7500K with 100% brightness.
• Enhanced—Used for images with richly saturated and vivid color. It is based on
brightness mode.
• REC709—Used for high-definition television. It sets the color temperature to 6500K with
80% of the maximum brightness.
• DICOM SIM—Used for high contrast content, such as X-ray diagram. It sets the color
temperature to 7500K with 65% brightness.
• Blending—Used for multiple projector application. It sets the color temperature to
7000K with 85% of maximum brightness.
• HDR—Used for displaying high dynamic range content for deepest blacks, brightest
whites, and vivid cinematic color using REC.2020 color gamut.
• 3D—Used to display the 3D content. For more information on configuring 3D settings,
see Setting up 3D display
• 2D High Speed—Used for displaying 2D input signal at 120Hz.
• User—Customized picture setting. See
for further details of creating a customized picture setting.
3. Press ENTER.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
on page 36.
Editing customized picture setting
Adjusting the image settings
on page 41
40