Adjusting The White Peaking; Adjusting The Color Temperature; Saving User Settings For Data Recovery - Christie GS 2K Series User Manual

Adjusting the white peaking

Use white peaking to adjust the color of white. The maximum value of white peaking, 100, can
increase the brightness of white to near 100%.
1. Select Menu > Image Settings > Advanced Image Settings > White Peaking.
2. Adjust the slider by arrow keys or press ENTER to input the value.
3. Press ENTER.

Adjusting the color temperature

Adjust the color temperature as expressed in degrees Kelvin.
1. Select Menu > Image Settings > Advanced Image Settings > Color Temperature.
2. Select appropriate color temperature:
• Warmest—Sets the color temperature to 5500K.
• Warm—Sets the color temperature to 6500K.
• Cool—Sets the color temperature to 7500K.
3. Press ENTER.

Saving user settings for data recovery

Create a recovery copy of all the user data. This information can be used later to recover settings if
necessary.
1. Select Menu > Image Settings > Advanced Image Settings > Backup Restore > Save.
2. To save the user data, select an empty record.
One projector can save up to five backups.
3. To confirm the selection, press ENTER.
4. Select Menu > Image Settings > Advanced Image Settings > Backup Restore >
Restore.
5. To restore a specific backup, select the required record.
6. To start restoring data, press ENTER.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image settings
46