Electrical Connection - DITEC DAB305 Installation And Service Manual

12 Electrical connection

12 Electrical connection
Note! During any work with the electrical connections the mains must be disconnected.
• Place the electric switch easily accessible from the operator. If an plug contact is used in the
installation the wall socket shall be placed easily accessible from the operator.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
See Auto-learn-automatically sets back and latch check (recommended) on page 71.
If R/S < 192mm, the connection box should be rebuilt.
Mains connection
a Switch off the mains.
b Connect the plug contact to the wall socket or connect to the mains switch.
Standard
58 Issue 2021-06-07 1020527-DIen-3.0