Table of Contents
Advertisement
19
Service/Maintenance
Regular inspections shall be made according to national regulations and product documentation
by a Ditec-trained and qualified technician. The number of service occasions should be in accordance
with national requirements and product documentation. This is especially important when the
installation concerns a fire-approved door or a door with an emergency opening function.
As with all other technical products, an automatic door needs maintenance and service. It is essential
to know the importance of maintenance to have a reliable and safe product.
Service and adjustments will ensure a safe and proper operation of an automatic door unit.
The table below shows the recommended interval in months, when to replace parts during pre-
ventive maintenance.
Risk of battery explosion if wrong type of battery is used. If Battery Monitoring DIP is ON, then a
reset of this is needed (after changed batteries), see page 17.
1020527-DIen-3.0
Issue 2021-06-07
19 Service/Maintenance
87
Advertisement
Table of Contents
