10 Pre-installation
10.3
Installation examples
1
A
3
C
A
1
Aluminum profile system
2
Plasterboard wall
3
Reinforced concrete wall and brick wall
4
Plasterboard wall
10.4
Fastening requirements (but not included)
Base material
Steel
Aluminum
Reinforced concrete
Wood
Brick wall
* Ditec minimum recommended requirements. Building Codes may give different specifications.
** Thinner wall profiles (3-5 mm) must be reinforced with rivet nuts.
*** Thinner wall profiles (4-6 mm) must be reinforced with rivet nuts.
32
2
A
4
A
Steel reinforcement or rivet nut
B
Wood reinforcement
C
Expansion-shell bolt (for brick wall min. M6x85,
UPAT PSEA B10/25)
Minimum requirements of wall profile*
5 mm**
6 mm***
min. 50 mm from the underside
50 mm
Expansion-shell bolt, min. M6x85, UPAT PSEA B10/25, min. 50 mm from
the underside
Issue 2021-06-07
Non combustible mater-
ial in fire application
B
Non combustible ma-
terial in fire application
B
1020527-DIen-3.0