13.2
Micro switch
Check and adjust the micro switch, controlling the lock kick at power failure.
13.3
Adjusting the door stop
a Close the door.
b Open the door to required open position, plus approx. 15 mm. Put a doorbuffer under the door.
c When stop arm is on top of the operator, lift the door stop arm up and mount it on the splines,
as close as possible to the stop block 1). Fine-adjust if necessary with the screw on the stop arm
2).
1020527-DIen-3.0
≈ 95°
1)
Issue 2021-06-07
2)
13 Start-up
69