Configuration And Setup; Initial Configuration; Basic Setup - VersaLogic Python EBX-11 Reference Manual

Initial Configuration

The following components are recommended for a typical development system.

EBX-11 single board computer

200-pin SODIMM (memory module): DDR200, DDR266, or DDR333

ATX power supply with motherboard and drive connectors

SVGA video monitor

Keyboard with PS/2 or USB connector

Mouse with PS/2 or USB connector

IDE hard drive

IDE CD-ROM drive
The following VersaLogic cables are recommended.

Video adapter cable (CBR-1201)

Utility I/O cable (CBR-5009A) and accompanying board (CBR-5009B)
 IDE data cable (CBR-4406); may also require 2mm to 0.1" adapter (CBR-4405)

Power adapter cable (CBR-2022)
You will also need a Windows (or other OS) installation CD.

Basic Setup

The following steps outline the procedure for setting up a typical development system. The EBX-
11 should be handled at an ESD workstation or while wearing a grounded antistatic wrist strap.
Before you begin, unpack the EBX-11 and accessories. Verify that you received all the items you
ordered. Inspect the system visually for any damage that may have occurred in shipping. Contact
Support@VersaLogic.com immediately if any items are damaged or missing.
Gather all the peripheral devices you plan to attach to the EBX-11 and their interface and power
cables.
It is recommended that you attach standoffs to the board (see 3) to stabilize the board and make it
easier to work with.
Figure 3 shows a typical start-up configuration.
EBX-11 Reference Manual

Configuration and Setup

2
7