Configuration And Setup; Initial Configuration; Basic Setup - VersaLogic Ocelot Reference Manual

Distributor of VersaLogic Corporation: Excellent Integrated System Limited
Datasheet of VL-CBR-2012 - 20" 24-BIT LVDS CABLE
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com

Initial Configuration

The following components are recommended for a typical development system with the
VL-EPMs-21 computer:

ATX power supply

DDR2 memory module (see System RAM)

LVDS display (or analog display with VL-CBR-2014 adapter card)

Standard I/O breakout board (VL-CBR-5012)

USB keyboard and mouse

USB floppy disk drive (optional)

IDE hard drive (optional)

IDE CD-ROM drive (optional)
The following VersaLogic cables are recommended:

VL-CBR-2012 (or Hirose alternative VL-CBR-2010) or VL-CBR-2011 (JAE)
LVDS adapter cable
 VL-CBR-4406 – IDE data cable
 VL-CBR-4405 – IDE adapter board, if you are using drives with 40-pin
connectors

VL-CBR-1008 – Power adapter cable
You will also need an operating system (OS) installation CD-ROM.

Basic Setup

The following steps outline the procedure for setting up a typical development system.
The VL-EPMs-21 should be handled at an ESD workstation or while wearing a
grounded antistatic wrist strap.
Before you begin, unpack the VL-EPMs-21 and accessories. Verify that you received all
the items you ordered. Inspect the system visually for any damage that may have
occurred in shipping. Contact
damaged or missing.
Gather all the peripheral devices you plan to attach to the VL-EPMs-21 and their
interface and power cables.
It is recommended that you attach standoffs to the board (see Hardware Assembly) to
stabilize the board and make it easier to work with.
Figure 2 shows a typical start-up configuration (using RoHS compatible cables).
VL-EPMs-21 Reference Manual

Configuration and Setup

Support@VersaLogic.com immediately if any items are
2 2
7