Table of Contents
Advertisement
CompactFlash
Connector J11 provides a socket for a Type I or Type II CompactFlash (CF) module. This IDE
based interface operates on the same channel than the IDE interface at connector J12. The CF
interface supports operation in DMA mode.
The following CF modules have been tested and qualified as bootable devices by VersaLogic.
Part numbers with a suffix of -3500 are RoHS-compliant.
I
O
NSTALLING AN
On EBX-11 Rev. 5.02 and earlier boards, to install an operating system from a CD-ROM drive to
the CF, the CF must be configured as the slave IDE device and the CD-ROM drive as the master.
To ensure proper OS installation, do the following:
1. Verify that no jumper is installed at V2[1-2]. This is the default setting, which designates
the CF as the slave IDE device.
2. Jumper the CD-ROM drive as the master IDE device.
Configure the following CMOS Setup parameters on the Basic CMOS Configuration
3.
screen:
DRIVE ASSIGNMENT ORDER | DRIVE C: Ide 1/Pri Slave
ATA DRV ASSIGNMENT | Ide 0: 5 = IDE CDROM
ATA DRV ASSIGNMENT | Ide 1: 3 = AUTOCONFIG,LBA
BOOT ORDER | Boot 1st: CDROM
EBX-11 Reference manual
Table 16. Qualified Bootable CF Modules
Manufacturer
Density
Hagiwara
1 GB
Hagiwara
512 MB
Silicon Systems
128 MB
Silicon Systems
128 MB
Silicon Systems
256 MB
Silicon Systems
256 MB
Silicon Systems
256 MB
Silicon Systems
256 MB
Silicon Systems
512 MB
Silicon Systems
512 MB
Silicon Systems
512 MB
Silicon Systems
512 MB
Silicon Systems
1 GB
Silicon Systems
1 GB
Silicon Systems
2 GB
Silicon Systems
2 GB
Silicon Systems
2 GB
Silicon Systems
4 GB
S
C
PERATING
YSTEM ON
OMPACT
Interfaces and Connectors
Mfg Part Number
CF1-1GMDG(H00AA)
CF1-512MDG(H00AA)
SSD-C12M-3012
SSD-C12M-3500
SSD-C25M-3012
SSD-C25MI-3012
SSD-C25M-3500
SSD-C25MI-3500
SSD-C51M-3012
SSD-C51MI-3012
SSD-C51M-3500
SSD-C51MI-3500
SSD-C01G-3012
SSD-C01G-3500
SSD-C02G-3012
SSD-C02GI-3012
SSD-C02G-3500
SSD-C04GI-3012
F
LASH
37
Advertisement
Table of Contents
