Wan Pppoe 2 Connection - Verizon MI424-WR User Manual

5
Using Network Connections

5.9 WAN PPPoE 2 Connection

Default Route Click in this check box to define the connection as the
default route.
Multicast - IGMP Proxy Default Click in this check box to enable the FiOS
Router to issue IGMP (Internet Group Management Protocol) host messages
on behalf of hosts the FiOS Router discovers through standard IGMP interfaces.
IGMP proxy enables the routing of multicast packets according to the IGMP
requests of local network devices asking to join multicast groups.
Routing Table
Clicking New Route generates the "New Route" screen, where a new route can
be configured.
Internet Connection Firewall
Click in the "Enabled" check box to activate the FiOS Router's firewall on the
WAN PPPoE connection.
5.9 WAN PPPoE 2 Connection
Click WAN PPPoE 2 in the Network Connections screen to generate the "WAN
PPPoE 2 Properties" screen. WAN PPPoE 2 is used for the FiOS Router's PPPoE
connections over coaxial cable. This screen displays a list of the connection's
properties. The only modifications that can be made from this screen are
disabling the connection (by clicking Disable) or renaming the connection (by
entering a new name in the "Name" text box).
© 2010 Verizon. All Rights Reserved.
94