System Alarms - DPS Telecom NetGuardian BSM User Manual

11.11

System Alarms

See "Display Mapping" in the Reference Section for a complete description of system alarms.
Pnt (Point)
Description
Notification Devices
Relay Map
Note: The NGBSM G2 comes with 3 CAN bus system alarms (CAN RX WARNING, CAN TX WARNING, CAN TX
BUS OFF) that will trigger when the CAN transmission error counter or CAN receive error counter exceed certain
values, as detailed in CAN specification 2.0b.
The Provisioning > System Alarms menu
Editing System Alarms
Silence
The system alarm point number
Non-editable description for this System (housekeeping)
Alarm.
Check this box to choose to silence this alarm.
Check which notification device(s), 1 through 8, you
want to send alarm notifications for that alarm point.
Configure your system alarm to latch a relay.
41