Can 232 (G1 Only) - DPS Telecom NetGuardian BSM User Manual

32
11.5

CAN 232 (G1 only)

The Provisioning > CAN 232 menu allows you to change settings depending on the port type of your NetGuardian
BSM. From this menu, you can select a mode of operation and enable reach-through serial port functionality.
Port Type
Baud, Parity, and Stop Bits Choose 115200, 8-bit data, 1 stop bit.
RTS Head
RTS Tail
Enable Reach-Through
Type
The Provisioning > CAN 232 menu
Port Configuration
Choose 232.
Choose 0.
Choose 0.
Use to configure CAN232 converter via telnet session:
Port Port number used for reach-through.
Select TCP or UDP traffic to be passed through to a serial
device.
Reach-Through
telnet [IP address] [port]
Example: telnet 192.168.1.100 3000