Date And Time - DPS Telecom NetGuardian BSM User Manual

44
11.14

Date and Time

Date
Time
Enable NTP
NTP Server Address or Host Name
Time Zone
Enable DST
Start Day
End Day
The Provisioning > Date and Time menu
Unit Time
Set today's date.
Set the current time.
Automatic Time Adjustment (NTP)
Check this box to enable Network Time Protocol.
Enter the NTP server's IP address or host name, then click Sync.
Example: us.pool.ntp.org. Note: Make sure to configure DNS before using
host name instead of IP address.
Select your time zone from the drop-down menu.
Adjust Clock for Daylight Savings Time (DST)
Check this box to have the NetGuardian BSM observe Daylight Savings.
Select the month, weekday, and time when Daylight Savings will begin.
Select the month, weekday, and time when Daylight Savings will end.