Table of Contents
Advertisement
28
11.1.1 BMS Interrogator
Polling Enabled
Notifications
Polling Delay
Timeout
Discovery Delay
Claimed Address Delay
Temperature Units
CAN Address
Sync Batteries
BMS Interrogator
Check to monitor CAN Network.
Report critical alarms via SNMP Trap or email (See Section 9.1)
Time between polling string of batteries. Default 10 sec.
How long BMS has to respond before it is considered not detected. Default
1 sec.
How often NetGuardian searches for new batteries added to CAN Network.
Default 60 sec.
How often NetGuardian checks for batteries going offline.
Units to format temperature recordings.
Address for this CAN device (usually use default).
Saves the serial numbers of all currently connected batteries, click when
batteries are added or removed. This action can also be performed by SNMP
SET dpsRTUsyncReq=1.
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian BSM and is the answer not in the manual?
Questions and answers