Table of Contents
Advertisement
3.1.3
Installing the HDD Module
The ITA-1710 reserves a space for a 2.5" HDD module. Please refer to the following
instructions to install the hard disk drive.
1.
Place the HDD into 2.5" HDD holder, and lock it with 4 screws.
2.
HDD holder has 4 semi-circles (2 bigger and 2 smaller) on both sides, which are
used to place rubber cushions, the black ones for bigger semi-circles and trans-
parent ones for smaller semi-circles.
3.
Place the HDD holder onto HDD bracket, and secure it with 4 screws.
4.
Connect the complete HDD module to the chassis and fix it with 4 screws.
5.
Stick the cooling pad onto the PCB panel of HDD. Please align the cooling pad
with the magnetic head to protect the head from being covered.
ITA-1710 User Manual
Figure 3.3 Installing the HDD Module
20
Advertisement
Table of Contents
