4.2.2.9
USB Configuration
Legacy USB Support
Enable support for traditional USB. It will be automatically set as "Disabled"
when no USB device is connected. The default setting is "Enabled".
USB 2.0 Controller Mode
Options are HiSpeed/ Fullspeed. The default setting is "HiSpeed".
BIOS EHCI Hand-Off
Enables operating system without hand-off feature.
Hotplug USB FDD Support
System will create a virtual FDD device connected with hot swap FDD. The vir-
tual device is only automatically generated when no USB FDD exists.
Figure 4.16: USB Configuration
41
ITA-1710 User Manual