Advantech ITA-1710 User Manual page 42

4.2.2.3 Super I/O Configuration
 Serial Port1/2/ Address and IRQ and Mode setting
This option configures serial port 1/2 base addresses and IRQ, as well as RS-
232/422/485 mode. Serial Port 3 ~ 10 RS-232/422/485 mode configurations are
decided by jumper setting.
 Parallel Port Address and IRQ and Mode setting
This option configures parallel port base addresses and IRQ, as well as RS-232/
422/485 mode.
 Auto Flow Control For Serial Port1
This option configures serial port 1's 485 protocol. Options are "Enabled" and
"Disabled".
 Auto Flow Control For Serial Port2
This option configures serial port 2's 485 protocol. Options are "Enabled" and
"Disabled".
ITA-1710 User Manual
Figure 4.7: Super I/O Configuration
32