Advantech ITA-1710 User Manual page 49

4.2.2.7 APM Configuration
 APM Configuration
Includes 5 options.
– Power Management /APM
Options are "Disabled" and "Enabled". The default setting is "Enabled".
– Restore on AC Power Loss
Options are Power off/Power on/Last state. The default setting is "Power Off".
– Resume on Ring
Options are "Disabled" and "Enabled". The default setting is "Disabled"
– Resume on RTC Alarm
Options are "Disabled" and "Enabled". The default setting is "Disabled"
 ITA-1710 Series Power Mode
Detects current power mode: "AT mode" or "ATX mode".
Figure 4.14: APM Configuration
39 ITA-1710 User Manual