Advantech ITA-1710 User Manual page 52

 USB Mass Storage Device Configuration
Figure 4.17: USB Mass Storage Device Configuration
– USB Mass Storage Reset Delay
POST time (seconds) of USB mass storage after starting the unit command.
– USB Devices Emulation Type
Set the simulation type of current USB device: [Auto], [Floppy], [Forced
FDD], [Hard Disk] and [CDROM].
If set as "Auto", USB device smaller than 530 MB will be simulated as FDD,
and others as HDD. If set as "Forced FDD", FDD format drivers can be
started as FDD, such as ZIP driver.
ITA-1710 User Manual 42