Advantech ITA-1710 User Manual page 55

4.2.4.1 Boot Settings Configuration
 Quick Boot
Allows the BIOS to skip certain tests while booting. The default setting is
"Enabled".
Quiet Boot

If this option is set to Disabled, the BIOS displays normal POST messages. If
Enabled, an OEM Logo is shown instead of POST messages.
 AddON Rom Display Mode
Sets the display mode of optional ROM.
 Bootup Num-Lock
Select the Power-on state for Numlock.
 PS/2 Mouse Support
Selects support for PS/2 Mouse. (Only available under DOS)
 Wait For 'F1' If Error
Wait for the F1 key to be pressed if an error occurs.
 Hit 'DEL' Message Display
Displays "Press DEL to run Setup" in POST.
 Interrupt 19 Capture
Some add-on cards' ROM options need Interrupt 19, this is to enable or disable
supporting this kind of add-on cards.This setting is required by PCI card based
on ROM configuration utility.
 Bootsafe function
This option allows users to enable or disable bootsafe function.
 Boot Device Priority
Configures the boot priority of available devices: [Hard Disk Device],
[Removable Device], [CD-DVD ROM].
Figure 4.20: Boot Settings Configuration
45 ITA-1710 User Manual