Configure The Mulitcast; Configure The Igmp; Figure 4-12 Sntp - Zte ZXHN H268A Maintenance Management Manual

Figure 4-12 SNTP

2. Configure the SNTP parameters.
Table 4-9
Table 4-9 SNTP parameters
Parameter
Time Zone
Primary/Secondary NTP Server
Poll Interval
Daylight Saving Time
DSCP
3. Click Apply button to apply the changes.
– End of Steps –

4.6 Configure the Mulitcast

4.6.1 Configure the IGMP

The section describes how to configure IGMP. IGMP provides the parameters of IGMP
configuration features.
Steps
IGMP Mode
1. On the main page of the ZXHN H268A, select Internet > Multicast > IGMP to open
the IGMP Mode page, as shown in
SJ-20150916162339-007|2017-02-16 (R1.0)
lists the SNTP parameters.
Chapter 4 Configure the Internet
Description
Time zone.
IP address of the primary/secondary/third/fourth/fifth NTP
server.
Interval of time synchronization. Unit: second.
Enable or disable the save daylight time function.
Range: 0 - 63.
Figure 4-13.
4-19
ZTE Proprietary and Confidential