Achieving Maximum Line Speed - Domino F Series Product Manual

INSTALLATION INSTRUCTIONS

Achieving Maximum Line Speed

The F-Series includes a feature to extend the marking field when a moving
product is marked as it moves past the print head. This feature is used to
achieve maximum line speed.
Marking mode has to be configured for "Marking on the Fly".
Adjust the marking mode via: Home > Settings > Production Line Setup >
Line Movement > Setup Line Movement
Normally the first object in the direction of movement of a message is
marked when it has entered the marking area below the laser lens.
Product movement direction
Product
Marking field on
product
Marking area
Example for Marking on the Fly without an extended field
EPT009665 Issue 2 May 2015 2-57