Advanced Settings; Configuration Files; Install Options - Domino F Series Product Manual

ADVANCED SETTINGS

Home > Settings > Advanced
CAUTION:
Laser Parameters
Home > Settings > Advanced > Laser Parameters
Setup of laser parameter limits.
Set the following special laser parameters:
• Period Time
• Standby Period
• Standby Pulse
Activate the laser test mode and set the parameters:
• Period Time
• On Pulse Time
Set the period time for the laser cold start.

Configuration Files

Home > Settings > Advanced > Configuration Files
Direct access to the configuration files of the marking software.

Install Options

Home > Settings > Advanced > Install Options
Setup the options installed to the laser printer:
• Air Kit
• Chiller
• Vacuum
• Shutter Option
• Aiming Option
EPT009665 Issue 2 May 2015
OPERATION
Setup for trained users and service technicians only.
The system may be damaged by incorrect settings.
All warranty is lost when the system is damaged by
incorrect settings.
3-61