Content/Shift Codes; Clocks/Dates - Domino F Series Product Manual

Content/Shift Codes

Home > Settings > Global Print Settings > Content
The Setup Shifts screen allows the start time of each shift and a shift code
to be set. Each shift continues until the start time of the next shift.
Click on +Add Row to add a new shift. Enter the start time and the shift
code. Delete a shift by using the delete button.

Clocks/Dates

Home > Settings > Global Print Settings > Clock/Dates
• Julian Leap Day
• February 9th is marked as either 060 or 366 depending on the setting
for the Julian Leap Day.
• Expiration Update
• Selects between midnight, after last shift and until first shift. After last
shift updates the clocks at the end of the last shift even if that shift
spans across midnight and into the next day. Until first shift updates
the clocks at the beginning of the first shift even if the first shift occurs
before midnight of the previous day.
• Week Begin Day
• Selects a day of the week that is day 1 of each week.
• Time Granularity [ms]
• Defines the time accuracy and time after which clocks are re-compiled.
Every clock is re-compiled after the time set here. Computing power
may be saved by setting a higher value for the granularity.
• Alpha Hours
• Sets the string used by the Alpha Hour (h) time component.
• Defaults to A-Z (no I or O).
• Alpha Week Days
• Sets the Alpha Day encoding string. Defaults to ABCDEFG.
• First letter corresponds to the "Week Begin Day".
• Alpha Month Day
• Sets the Alpha Month Day encoding string.
• Defaults to 1234567890ABCDEFGHJKLNPQRSTVXYZ.
First component corresponds to the "Week Begin Day".
• Month Names
• The Month Names can be edited in the Month Names dialogue box for
later inclusion in a message.
• Month Short Names
3-28
OPERATION
EPT009665 Issue 2 May 2015