Standard Parameters; Default Parameters; Parameter Ranges - Domino F Series Product Manual

Standard Parameters

Default Parameters

Parameter
FPE
Waveform
StepPeriod [μs]
JumpDelay [μs]
MarkDelay [μs]
PolygonDelay [μs]
LaserOffDelay [μs]
LaserOnDelay [μs]
OnPulse
Period
MaxVectorLength [mm]
JumpSpeed [bit/ms]
MarkSpeed [bit/ms]

Parameter Ranges

Parameter
StepPeriod [μs]
JumpDelay [μs]
MarkDelay [μs]
PolygonDelay [μs]
LaserOffDelay [μs]
LaserOnDelay [μs]
MaxVectorLength [mm]
JumpSpeed [bit/ms]
MarkSpeed [bit/ms]
CAUTION:
Note: If the marking quality is not sufficient, due to missing vectors or
missing parts of vectors, consider the following rule:
LaserOffDelay < MarkDelay + StepPeriod + 10 μs
EPT009665 Issue 2 May 2015
OPERATION
F220 i-Tech 10mm scan head
F220 i-Tech 10mm scan head
The sum of the laser on delay and the jump delay
has to be larger than 180 microseconds!
Laser System
160
0
20
110
120
10
110
80
1
40 [25kHz]
0.2
6000
1000
Laser System
10..100
0..500
0..500
10..500
10..500
0..500
0..100
1000..11000
10..17000
3-51