Initial Setup Wizard - Domino F Series Product Manual

INITIAL SETUP WIZARD

This procedure is for trained personnel only. When logged in with a
password for the supervisor user level, this initial setup wizard will not be
available to the operator.
The initial setup Wizard is the simple way to configure the printer.
Note: System settings can only be changed after entering the
administrator password, which is only known by employees
authorised to carry out this level of change. This manual is intended
for supervisor level and does not cover installation.
(1) Home screen to login.
(2) Select Home > Settings > Initial Setup Wizard
Note: Setup procedure should be completed by a trained service
technician.
2-54
INSTALLATION INSTRUCTIONS
EPT009665 Issue 2 May 2015