Add A New Script - Domino F Series Product Manual

Add a New Script

Note: A script has to be copied to the scripts folder of the printer's disk
to insert it into a message. This may be done via Home >
Settings > File Manager.
To add a new script to the message:
(1) Press on the screen within a specific area of the Message Editor
where you require the item to appear. A cross hair will appear at this
location.
(2) Select the Add
(3) From the sub-menu select the Add Text
(4) Select +Variable > +Create New > Script.
(5) Specify the source for the script and the parameters needed within
the script.
(6) Select the green tick icon to enter the offset clock into the message.
(7) Activate the message for printing by sending it to the printer
the File menu
3-44
OPERATION
icon.
.
icon.
EPT009665 Issue 2 May 2015
via