Designated Use - Domino F Series Product Manual

HEALTH & SAFETY

DESIGNATED USE

The F-Series laser marking system is exclusively designated for fully
automated marking of packaging materials and products by laser radiation.
If the laser marking system is used for improper purposes, all liability claims
will be refused.
The technical specifications listed in "TECHNICAL REFERENCE" Part 4
must be observed and complied with at all times.
The manufacturer will not be liable for any material or personal damages
resulting from none-designated usage.
The laser marking system must only be operated by authorised and
specifically trained personnel who are familiar with and observe the
procedures within this manual.
It is strongly recommended to carry out a risk assessment regarding laser
printer integration according to EN ISO13849 and EN ISO11553. Potential
hazards resulting from laser material processing machines are reported in
EN ISO11553 including hazards from laser material processing (e.g. dusts,
emissions, fires or explosion) and other potential hazards.
1-4 EPT009665 Issue 2 May 2015