Creating And Editing A Message; Add Text - Domino F Series Product Manual

CREATING AND EDITING A MESSAGE

Add Text

(1) Select Messages > New Message or Settings > Message Editor to
open the Message Editor.
(2) Press on the screen within a specific area of the Message Editor
where you require the item to appear. A cross hair will appear at this
location.
(3) Select the Add
(4) The Add sub-menu displays.
Text
(5) From the sub-menu select the Text
Note: Change keyboards by selecting the appropriate Alternative
Keyboard icon at the bottom of the text entry screen.
(6) Enter the required text using the keyboard and select the green tick
icon when finished.
(7) To change text, select the text item and then the Keyboard icon on the
Edit sub-menu.
(8) To change text parameters (Object Name, Position, Bold, Width, etc.),
use the sub-menu (Font, Alignment) or select More...
(9) To delete an object, select the object and select the delete
the Edit menu.
(10) Activate the message for printing by sending it to the printer
the File menu
3-30
OPERATION
icon.
Barcode Image
(MERC)
.
Arc Clone
Rectangle Item
icon.
EPT009665 Issue 2 May 2015
icon of
via