Production Line Setup - Domino F Series Product Manual

Production Line Setup

Home > Settings > Production Line Setup
Set:
• Printer Orientation
• Rotates the print head and/or product to set the correct orientation.
• One may mirror the print.
• Set the vector sorting direction in such a way that marking is
processed in the opposite direction to the direction in which the
product is moving. If "none" is selected, the vectors will be processed
in the normal marking order of the objects.
• Print Field
• Sets the usable dimension and scanner dimension of the print field:
Width, height and centre point.
• Set restriction for the print field.
• Trigger a test print to measure the field to setup the field size.
• Optics
• Select the correction matrix for the used scanner and lens
configuration and make a test print of it.
• Select the tube distortion axis to mark round objects.
• Line Movement
• Product Line Movement: Static or mark on the fly.
• Encoder Setup:
Transformation.
• Product Distance: Maximum distance and print start ignore distance
see "Product Distance and Print Start - Ignore Distance" on page
• Print Trigger
• Product Detect
• Continuous Printing: Trigegr a print by given time interval.
• Debounce Settings: Set the ramp times.
• Shift Register
• Enable the shift register between trigger signal and print on the
product and set the depth.
3-22
OPERATION
Source, scale delay and field usage
EPT009665 Issue 2 May 2015
PN
2-63.