Replacing The Lens - Domino F Series Product Manual

REPLACING THE LENS

WARNINGS: (1)
(2)
(3)
CAUTION:
The lens consists of the optics retainer and the focusing lens, which has
been adjusted at manufacture.
Lens
Scanner
Head
Notes: (1) Ensure the replacement lens is available before starting this
procedure.
(2) Release these two screws and carefully pull out the lens.
(3) Do not touch the lens or the inside of the scanner.
(4) To mount a lens, plug in the lens carefully and fasten the two
screws.
EPT009665 Issue 2 May 2015
MAINTENANCE AND FAULT FINDING
Before undertaking any work on the laser
marking system, remove the mains power plug.
This procedure is to be performed by fully
trained engineers only.
The lens must not come in contact with
unprotected skin (health hazard).
Protect the lens from damage by shock or
scratching.
Screws for
lens
5-23