Changing The Fuses; Main Power Fuses F1 And F2; Laser Power Supply Fuse, Label F3 - Domino F Series Product Manual

CHANGING THE FUSES

WARNINGS: (1)
(2)
(3)

Main Power Fuses F1 and F2

If a fuse is blown, replace with the same type:
• Manufacture:
(Distributor: Farnell 117-5150) Art.Nr. 70 065 65 – 12.5A T
• Rated Current: 12.5A delay
• Rated breaking capacity: 1500A / 500V AC

Laser Power Supply Fuse, Label F3

If a fuse is blown replace with the same type
• Manufacture: BELfuse (ESKA Type: UL 632.627).
• Rated Current 10A fast.
• Rated breaking capacity: 200A / 250V AC.
5-24
MAINTENANCE AND FAULT FINDING
Before undertaking any work on the laser
marking system, remove the mains power plug.
This procedure is to be performed by fully
trained engineers only.
Two pole fuses are used.
SIBA Sicherungen-Bau GmbH; Lunen, Gemany
EPT009665 Issue 2 May 2015