Add A New Coding; Add A New Shift Code - Domino F Series Product Manual

Add a New Coding

Coding allows a specified text file to be inserted into a message (.txt) and
printed line by line.
Notes: (1) ASCII/Unicode (MTF8) text files are allowed for coding. (No
Excel files etc.). Also, each line of the coding file must end with a
carriage return (CR) and a Line Feed (LF).
(2) A coding file has to be copied to the coding folder of the
printer's disk to insert it into a message. This may be done via
Home > Settings > File Manager.
To add a new coding to the message:
(1) Go to the File
connection containing the information to print.
(2) Press on the screen within a specific area of the Message Editor
where you require the item to appear. A cross hair will appear at this
location.
(3) Select the Add
(4) From the sub-menu select the Add Text
(5) Select +Variable > +Create New > Coding.
(6) Specify the parameters for coding.
(7) Select the green tick icon to enter the coding into the message.
(8) Activate the message for printing by sending it to the printer
the File menu

Add a New Shift Code

(1) Define shift codes via Home > Settings > Global Print Settings >
Content
(2) Press on the screen within a specific area of the Message Editor
where you require the item to appear. A cross hair will appear at this
location.
(3) Select the Add
(4) From the sub-menu select the Add Text
(5) Select +Variable > +Create New > Shift.
(6) The shift code is inserted into the message.
(7) Activate the message for printing by sending it to the printer
the File menu
EPT009665 Issue 2 May 2015
OPERATION
menu and select via Coding
icon.
.
icon.
.
the file or remote
icon.
icon.
via
via
3-45