OPERATION
Aiming Beam and Shutter
The standard aiming beam is transferred via the fibre to the laser head and
scanner. When a shutter is installed, no aiming beam can reach the scanner
and therefore no aiming beam is available for product positioning.
Due to this, Domino offers an extra aiming beam which is installed after the
shutter to position products when a shutter is installed in the laser head.
laser module
lens
laser beam (and internal aiming beam)
scanner head
Without Shutter
with shutter
laser module
extra aiming beam
laser beam (and internal aiming beam)
blocked by shutter
scanner head
lens
With Shutter
EPT009665 Issue 2 May 2015
3-27