F-Series Connectivity - Domino F Series Product Manual

F-SERIES CONNECTIVITY

The F-Series is operated either via a remote TouchPanel or via a PC running
on Microsoft Windows 7
software. To connect to one F-Series, the TouchPanel is connected to the
X59 TouchPanel connector of the controller. The TouchPanel then displays
the UI relating to that printer.
One TouchPanel can control multiple F-Series in the same network if
required.
Details about the printer being controlled are displayed in the Home screen,
which lists: the logged in user, the printer name and model. To connect to
another printer in the network, follow the steps below:
(1) Disconnect from the current printer by pressing the Lock button and
selecting Disconnect From Printer to display the printers' list screen.
(2) Press the Lock button and select Unlock UI Settings, enter the
password (QS).
(3) Press Settings, select Broadcast (default) as the connection method.
(4) Go back to the printers' list screen and press Refresh to view a list of
all printers in the network.
(5) Select the required printer.
A list of favourite remote printers can be created, as follows:
(6) From the printer's list screen, press the Lock button and select Unlock
UI Settings, enter the password (Domino1).
(7) Press Settings and select Favourite as the connection method.
(8) Press Add Favourite and fill in the required fields manually or get a
favourite printer from broadcast.
(9) Select a printer from the broadcast list.
(10) Press Add to Favourites.
3-16
OPERATION
® ®
or Windows 8
X59 TouchPanel Connector
with installed QuickStep
EPT009665 Issue 2 May 2015