LAUNCH TECH X-431 ADAS PRO User Manual page 6

LAUNCH
from the vehicle's diagnostic socket.
On Using Laser Module
There is a risk of injury through dazzling the eyes when working with the laser.
Therefore regard the following:
 Do not direct the laser beam towards persons, doors or windows.
 Never look directly into the laser beam because it may cause damage
to/destruction of the retina.
 Ensure the calibration room is properly illuminated.
 While moving the laser module, hold it tightly to protect it from falling down on the
floor.
 While installing a laser module, please make sure it is firmly and securely attached.
 Only use a straight screwdriver to adjust the laser beam radius.
(c) Diagtools, Pernavas 43A, Riga, Latvia, www.diagtools.eu, +37129416069
X-431 ADAS PRO Calibration Tool User Manual
2