Table of Contents
Advertisement
LAUNCH
2. Use the screws to fasten it on the calibration panel.
4.2 Activate the Software Calibration Function
By default, the calibration feature of the pre-installed diagnostic software of LAUNCH
scanners is disabled. To ensure normal use of the calibration function of the diagnostic
software, you need to activate the pin card to unlock the calibration function on the
LAUNCH scanner (sold separately) first.
Follow the steps below to activate it. Here we take X-431 PAD II for example to
demonstrate how to activate the ADAS function.
*Note: Different LAUNCH scanners have different accesses to the ADAS function. For
details, please refer to the user manual of individual scanner.
1. Press the [POWER] button on the diagnostic tool to turn it on.
2. Tap the application icon on the home screen to launch it.
3. Log in the system, a screen similar to the following figure appears:
27
(c) Diagtools, Pernavas 43A, Riga, Latvia, www.diagtools.eu, +37129416069
X-431 ADAS PRO Calibration Tool User Manual
Fig. 4-7
Advertisement
Table of Contents
Need help?
Do you have a question about the X-431 ADAS PRO and is the answer not in the manual?
Questions and answers