3.0
Appendix
3.1
Troubleshooting
If any of the following conditions are observed:
•
Suspect water or leakage in the enclosure
•
A switch gets broken or sheared off
•
The glass becomes scratched, cracked, chipped, or pitted.
•
A sealing fitting is sheared off or damaged
•
The door is hit by a vehicle or object
•
A hinge is damaged or sheared off
•
If you notice or suspect any damage to the unit
Do the following:
•
Clear area of all personnel and notify plant safety
•
Shut down all power to the unit at the source and lock out
•
When the area has been cleared of the hazard and plant safety has declared the area safe for workers to
enter, call your scale dealer
•
Do not attempt to restart the unit until all damaged parts have been replaced and the unit has been tested.
Appendix
13