3.0
Appendix
3.1
Using a Terminal Program
Hyper Terminal and similar utilities are communications programs that can be used to connect to an Ethernet
interface for communications and testing.
1. Start the terminal program.
2. Enter a name for the connection.
3. Configure the connection to use TCP/IP.
4. Enter the device address and port number 2101.
5. The connection is now established. Use the host commands to talk to the scale or observe the continuous
print string if the crane scale is configured so.
6. To end the session save the connection and close the terminal program.
3.2
Security Settings
Java security settings may need to be modified on the computer in order for the scale discovery utility to run.
1. Open the
Control Panel
2. Select
Programs
3. Select
to open the
Java
4. Select the
Security
5. Click the
Edit Site List...
6. Add the
Scale Discovery Utility
10
Ethernet 802.11b
panel on the computer.
(for category view).
.
Java Control Panel
tab.
button.
see Figure 3-1
,
Figure 3-1. Add MSI Site to Security
.