Agilent Technologies 8355 Sulfur User Manual page 66

5
Maintenance
Table 10 Nuts, ferrules, and hardware for capillary columns
Column id (mm) Description
.53 Ferrule, graphite, 1.0-mm id
Ferrule, graphite, 0.8-mm id
Column nut, finger-tight (for
0.53-mm columns)
.45 Ferrule, graphite, 0.8-mm id
.32 Ferrule, graphite, 0.5-mm id
Column nut, finger-tight
(for .100- to .320-mm columns)
.1 – .25 Ferrule, graphite, 0.4-mm id
Column nut, finger-tight (for
.100- to .320-mm columns)
All Ferrule, no-hole
Capillary column blanking nut
Column nut, universal
Column cutter, ceramic wafer
Ferrule tool kit
66
Table 9 Filters for the SCD and NCD
Description/quantity
Gas Clean filter, sulfur (filters sulfur and moisture)
Gas Clean Filter SCD Kit, for sulfur
chemiluminescence detectors
Typical use
0.53-mm capillary columns
0.53-mm capillary columns
Connect column to inlet or detector
0.45-mm capillary columns
0.1-mm, 0.2-mm, 0.25-mm, and
0.32-mm capillary columns
Connect column to inlet or detector
0.1-mm, 0.2-mm, 0.25-mm, and
0.32-mm capillary columns
Connect column to inlet or detector
Testing
Testing–use with any ferrule
Connect column to inlet or detector
Cutting capillary columns
Ferrule installation
Part number
CP17989
CP17990
Part number/quantity
5080-8773 (10/pk)
500-2118 (10/pk)
5020-8293
500-2118 (10/pk)
5080-8853 (10/pk)
5020-8292
500-2114 (10/pk)
5020-8292
5181-3308 (10/pk)
5020-8294
5181-8830 (2/pk)
5181-8836 (4/pk)
440-1000
SCD and NCD User Manual