Agilent Technologies 8355 Sulfur User Manual page 11

Table 1 7890B GC Learning Products
Learning product
Advanced Operation Manual
Maintaining Your GC
Troubleshooting
GC Software Familiarization
Data system help
SCD and NCD User Manual
Contents
Procedures and theory of operation
not normally required for daily use:
programming; detailed information
about methods and sequences; inlet
(column) flow and pressure modes;
inlet, detector, valve, oven, and other
setpoint details; and output signal
settings.
Procedures to maintain the GC,
including procedures for all standard
inlet and detector options.
Replacement parts information.
Instructions for using Early
Maintenance Feedback (EMF).
Procedures for resolving GC issues.
Symptoms and resolutions for
resolving GC or chromatographic or
hardware issues. Procedures to
determine whether an issue is
hardware-related, software-related, or
related to other factors (such as
sample preparation).
Introduction to the data system
control software user interface for the
GC. Introduces concepts for EMF and
configuration, and other new features.
Topics and tasks for creating and
editing methods for the GC.
Language Versions
Agilent provides the 7890B learning products in several
languages. Table 2 below lists the manuals and the languages
available for each manual format (print, Adobe PDF, or HTML).
Getting Started
When to use this documentation
•
When developing methods.
•
When running the GC standalone (no
data system).
•
To learn details about settings.
•
To look up a replacement part or
consumable part.
•
Before performing any maintenance
on the GC.
•
When trying to isolate the cause of
unexpected performance issues.
•
To locate settings in the data system
user interface.
•
To answer questions about using the
software to control the GC.
1
11