Table of Contents
Advertisement
PENTIUM® PRO PROCESSOR AT 150, 166, 180, and 200 MHz
Tt
=
T9 (GTL+ Input Hold Time)
Tu =
T8 (GTL+ Input Setup Time)
Tv =
T10 (RESET# Pulse Width)
Tw =
T16 (Reset Configuration Signals (A[14:5]#, BR0#, FLUSH#, INIT#) Setup Time)
Tx =
T17 (Reset Configuration Signals (A[14:5]#, BR0#, FLUSH#, INIT#) Hold Time).
T20 (Reset Configuration Signals (A20M#, IGNNE#, LINT[1:0]#) Hold Time)
Ty =
T19 (Reset Configuration Signals (A20M#, IGNNE#, LINT[1:0]#) Delay Time)
Tz =
T18 (Reset Configuration Signals (A20M#, IGNNE#, LINT[1:0]#) Setup Time)
Ta =
T15 (PWRGOOD Inactive Pulse Width)
Tb =
T10 (RESET# Pulse Width)
Tc =
T20 (Reset Configuration Signals (A20M#, IGNNE#, LINT[1:0]#) Hold Time)
34
Figure 18. Reset and Configuration Timings
Figure 19. Power-On Reset and Configuration Timings
E
Advertisement
Table of Contents
