Removal Of The Gas Strut From Manual Adjustable Backrest - Sunrise Medical Quickie Sedeo Lite Service Instructions Manual

Removal of the gas strut from manual adjustable backrest

Preparation
Note! Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the actuator
from a manual adjustable backrest unit
• Rebuild the wheelchair in reverse order once completed.
• Use small flat screwdriver to remove C-clips and pliers to
reinstall.
• Tightening torque for bolts is 6Nm.
Fig. 6.3.28 shows the starting position of the top bolt
Fig. 6.3.29
1. Remove bolt and washer (A) from the left side of the unit and
then slide out bolt (B)
Fig. 6.3.30
2. Removing (C) will allow you to partially remove the gas spring (D)
62
Tools used
5
A
2
Fig. 6.3.28
Fig. 6.3.29
B
1
Fig. 6.3.30
C
D
Sedeo PRO Rev.A